PINOUT всех CDMA телефонов ЗДЕСЬ!

[pavel2000]

А не подскажете ли?????

[SunriseSTV]

А если чуть усилий приложить по поиску данной распиновки, то она окажется совсем не дефицитной)))
http://cdmasoftware.com/ru/pinouts.html

Удачи))

[SunriseSTV]

Sanyo 4900/5300/8100
COM:
1,12(!!!)-GND
10-Vpp
6-TX(from phone)
8-RX(to phone)

Вам, что лень посмотреть чтоли?
это проверенный распин, по крайней мере я его проверял на 5300 и на 8100 , тока не забудте замкнуть 1 и 12 пин.

pavel2000 распин который тока якобы для 8100 подписан как Sanyo SCP-8100 pinout (not tested!)

[MartialOutlaw]

********************************************************
Nokia 8587, lg 7020, Motorola V720, SKY 5000 - 6200, Samsung V300:

---------------------------
|24 ...................... 1|
---------------------------

12, 19 - Gnd
21, 22 - +Vcc
13 - Tx
14 - Rx
********************************************************
Kyocera 2235/2255 Phone Signal
1 Ground
12 DP1_TXD
13 DP1_RXD
14 DP1_CTS/
2 DP1_DTR/
9 DP1_RI/
3 DP1_RTS/
15 DP1_DCD/
4 Ground
6 DP2_RTS/ (SYNC)
11 DP2_TXD (DIN)
5 DP2_RXD (DOUT)
7 DP2_CTS/ (CLK)
10 VBATT
8 VextDC

Kyocera Cable Connector (plug, facing the pins), (no coaxial pin)
16---9
[ O :::::::: ]
8----1
********************************************************
Audiovox 9100 pinout:

Count direction - from ANT whole in connector :

O 1 3 5 7
2 4 6 ...

1,3,21,25,26 - tied together to GND
13 - rx (to phone)
14 - tx (from phone)
********************************************************
CyberBell pinout:

Cable shematic:
14,15 - GRN
12 - rx
13 - tx

keyboard
18 16 14 12 10 8 6 4 2
17 15 13 11 9 7 5 3 1
********************************************************
Samsung SCH-611, 900, 811, 470, 670, 750, SPH-A400... pinout:
15,16 - +Battery
8 - TX data
7 - RX data
2,4,6 - GND

SCH-200
Serial OUT - PIN 4
Serial IN - PIN 3
DC GND - PIN 1

Samsung n191
keypad
---------------------
|18 ................ 1|
---------------------
5 - RX
6 - TX
8 - GND
14 - Vcc
Samsung SCH, SCH-X
3 - +
11 - TX
12 - RX
13 - GND
Samsung SCH-A530, SPH-A620
----------------------
|1 ................. 18|
----------------------
5, 18 - +
13 - RX
14 - TX
8, 11 - GND
Samsung SCH-A2000, SCH-A7500, SCH-A7600
keypad
---------------------------
|1 ...................... 24|
---------------------------
8 - GND
16 - TX
17 - RX
Samsung SPH-N240, N400, A460, A500 etc..
| || || || || || 0
1 11
1 - GND
2 - TX
3 - RX
4 - Vcc
********************************************************
Hundai600 pinout:
5 - tx
6 - rx
18,19 -Gnd
22- 5v+
HYUNDAI 600 (AUDIOVOX CDM-100)
keypad
---------------------------
|1 ...................... 24|
---------------------------
GND - 5, 6
VCC -
TX - 19
RX - 20
********************************************************
LG-300 pinout:
10,17,18 - +Battery
9 - Serial Out
12 - Serial In
14 - DC GND
LG
keypad
---------------------
|1 ................ 18|
---------------------
1+18 - +
9 - TX
12 - RX
15 - GND
LG
_________________
|1 ........................ 24|
|________________|
3 - dtr
13 - tx
14 - rx
17 - cd
18 - ri
12, 19 - gnd
20 - cts
21, 22 - +
23 - rts
24 - dtr

********************************************************
Motorola (CDMA) Pinouts:

1) GND Connected with 22pf to pin 3
2) RF out
3) GND Connected with 33 pf to pin 8, 33 pf to pin, 33 pf to pin 7
4) BAT_FDBAK
5) MAN_TEST connected with 10k to L275 (not used on digital phones)
6) RS232_TX - connected to MCU SPI bus
7) RS232_RX - connected to MCU SPI bus
8) AUDIO_IN
9) AUDIO_OUT
10) GNDA (Ground reference) Connected with 33 pf to pin 13, 33 pf to pin 14
11) UPLINK -|
12) DOWNLINK -|- DSC bus connected to the BIC
13) DSC_EN_B -|
14) EXT_B+
15) Gnd

Motorola 182c (Patagonia)
11gnd 13,14 rx,tx.
********************************************************
NOKIA 8887
keypad
---------------------
|18 ................ 1|
---------------------
1, 18 - GNDÿ
8 - Tx
9 - Rx
10, 11 - +Vcc
NOKIA 8587
keypad
---------------------------
|24 ...................... 1|
---------------------------
12, 19 - Gnd
21, 22 - +Vcc
13 - Tx
14 - Rx
********************************************************
Quallcom 820, SONY-1300 pinout
3-gnd 8-Tx 9-Rx
********************************************************
Sanyo SCP-8100 pinout (not tested!):
GND - 1,9,12
RX - 6
TX - 8
+5v - 10
Sanyo 4900/5300/8100
COM:
1,12(!!!)-GND
10-Vpp
6-TX(from phone)
8-RX(to phone)

USB :
1 - black (GND)
14 - red (Vbus)
15 - Green (Data+)
17 - White (Data-)
18 - black (GND)
********************************************************
SKY IM-1xxx - IM-3xxx, Kyocera 5135
---------------------
|18 ................ 1|
---------------------
1, 2 - GND
4 - RX
6 - TX
18 - +

[drim]

HYUNDAI 610E
keypad
[1...................... 22]


GND - 1,4, 5
+Vbat - 2,3
TX - ?
RX - ?
PW ON - 19

Собственно сабж , от 600 пинаут не подходит.

[zaq]

LG-800 pinout:
10,17,18 - +Battery
9 - Serial Out
12 - Serial In
14,15,2 - DC GND

[drim]

N101
[ - - - - - - - - - - - - - - - - - - - - - ]
24 1

8, 10, 12, 19 GND
21,22 +Vbat
13 Rx
14 Tx

Hyundai 600 смотри выше, там есть

моторола

[drim]

N181
8,11 - gnd
13,14 rx, tx.
18 =Vbat

[tusha]

А для Hyundai HWT-110 кто нибудь знает распиновку?

[zaq]

Hyundai HWT-110 да там же простой КОМовский кабель дружище вот ты дал это даже новичек увидет

[Alekc]

Люди подскажите нормальную распиновку на Sanyo 5300!!!
Я делал USB работает а ком не хочет!!!
Sanyo 4900/5300/8100
COM:
1,12(!!!)-GND
10-Vpp
6-TX(from phone)
8-RX(to phone)

USB :
1 - black (GND)
14 - red (Vbus)
15 - Green (Data+)
17 - White (Data-)
18 - black (GND)

[Alekc]

Распиновка для Kyocera
Kot: 1 2 3 4 5 6 7 8
gnd
9 10 11 12 13 14 15 16
Rx TX
Kot: 8.gnd
12.rx(tx)
13.tx(rx}