Сообщение от
danielif
DEAR JAF USERS ,
HERE IS THE METHOD TO UNLOCK NOKIA 2760 WITH JAF
PASTE THIS INI FILE IN YOUR JAF FOLDER
Powering the phone...
Reading...
MCU SW version: V 04.22
31-08-07
RM-258
(c) Nokia
HW version: 3002
PCI version:
UEM version: 1328
UPP version: 12642
RFIC version: 0500
DSP version: GDSP_P06w45.v32
LCD version: SUEZ
PPM version: V 04.22
31-08-07
RM-258
(c) Nokia
RCM
BT MCM version: 2222-v101
Content Pack version: Content: _pre_rcm
V 04.22
31-08-07
RM-258
(c) Nokia
Production serial number: XF2573453
Product code: 0556523
Module code: 0203319
Basic production code: 0515047
Flash code:
Order number:
Product specific data:
Long production SN: 0
ATO:
Default SN type:
IMEI plain: 358053019798542
IMEI spare to net: 3A 85 50 03 91 97 58 04
IMEI SV to net: 33 85 50 03 91 97 58 14 F0
Master Code: 4371751500
Phone type: RM-258, Software version: 04.22, Language Pack: RCM
User code: 12345
Block 1:
Lock 1: CLOSED -> Lock Data: 27203F
Searching for saved ini...
Checking for file C:\Program Files\ODEON\JAF\JAF_RM-258.ini
Saved INI not found, loading INI list...
Powering the phone...
Unlocking...
IMEI: 358053019798542
ASIC: b
SW version: 04.22
Selected flash file: C:\Program Files\Nokia\Phoenix\products\RM-258\rm258__04.22.mcusw
Decrypting flash...
Encrypting....
CHK Patch found - Unlock Patch found and are not in same block
Patch status: 02
MCU ID: 0x3162
Algo is ready...
P-key nokia module version 01.00
Erasing area: 016C0000 - 016DFFFF...
Erasing area: 01580000 - 0159FFFF...
Unlocking...
Checking locks...
Block 1:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 2:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 3:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 4:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 5:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 6:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 7:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Done!
DCT4 unlock counter: 672
Setting test mode...
Setting FULL FACTORY...
Operation took 0 minutes 4 seconds...
Done!
