HOTLINE MODE V MY-X6???

[ribbentrop]

А Атмега для ридера стоит 24 грн ....

[vilibrook]

DAAAA.
DELO PARNI NE V DENGAH.
I CODE READER YA MOGU KUPIT ORIGINALNIY .
DRUGOE DELO ,KUDA YA EGO POTOM DENU???
YA V RAZDELE "SAGEM" NAVERNOE NIKOGDA BOLSHE
NE POYAVLUS ,POTOMU CHTO SAGEM U NAS 10 SHTUK
NA VSYU STRANU.
POETOMU ISKAL YA RESHENIE K "PHONE CODE"
ZDES V ETOM RAZDELE.
MOZET KTO ZNAET.OKAZIVAETSYA CHTO NET

GRUSTNO ,GOSPODA UNLOCKERI

WBR

[Oxo_Boxo]

Very funny.....use SCR to get phone code....
Llike to kill fly with big hammer......

Some ppl solve all problems via SCR.....

REMEMBER.....SAGEM UNLOCK EXIST LONG TIME BEFORE.... and LONG TIME AFTER Sagem Code (or Clone ) Reader......

Now some useful info for member vilibrook:

Do next steps...and u will clear Phone Code of ANY Sagem phone.

1.Download freeware "Sagem Tools by GsmFunny"
2.Download freeware "Sagem Doctor 14c"
3.Start Sagem Tools
4.Go to "ReadInfos" Tab, and set "AT Commands" check box
5.Push Read Info Btn.
6.If connection between phone and PC is Ok....u will see phone IMEI, FW ,etc. in text boxes...
7.Now In Baudrate frame set 19200bps and push SET Btn!
8.Close Sagem Sagem Tools.
9.Start Sagem Doctor....select COM port and by "B" baudrate ....must be 19200!!!!
10.Go to "5'" - Edit Eeprom Field..Select Fiels 100!
11.phone answer with 4 bytes
12.Put this "00 00 FF FF" in field 100.Write to Phone.
13.Restart Phone.


NOW U Phone Code is : "0000"

BR

P.S. For all "smart" ppl....Steps 1 to 8....just eliminate "auto" speed selection in phone menu!

[vilibrook]

YOU ARE WELCOME

[PeterGSM]

Автор оригинала Oxo_Boxo
Very funny.....use SCR to get phone code....
Llike to kill fly with big hammer......

Some ppl solve all problems via SCR.....

REMEMBER.....SAGEM UNLOCK EXIST LONG TIME BEFORE.... and LONG TIME AFTER Sagem Code (or Clone ) Reader......

Now some useful info for member vilibrook:

Do next steps...and u will clear Phone Code of ANY Sagem phone.

1.Download freeware "Sagem Tools by GsmFunny"
2.Download freeware "Sagem Doctor 14c"
3.Start Sagem Tools
4.Go to "ReadInfos" Tab, and set "AT Commands" check box
5.Push Read Info Btn.
6.If connection between phone and PC is Ok....u will see phone IMEI, FW ,etc. in text boxes...
7.Now In Baudrate frame set 19200bps and push SET Btn!
8.Close Sagem Sagem Tools.
9.Start Sagem Doctor....select COM port and by "B" baudrate ....must be 19200!!!!
10.Go to "5'" - Edit Eeprom Field..Select Fiels 100!
11.phone answer with 4 bytes
12.Put this "00 00 FF FF" in field 100.Write to Phone.
13.Restart Phone.


NOW U Phone Code is : "0000"

BR

P.S. For all "smart" ppl....Steps 1 to 8....just eliminate "auto" speed selection in phone menu!

Regards 2 Bulgaria

[Alek1965]

Люди очень требуется схема Н О К И А 6630 и схема ТЕСТ ПОИНТ для СИМЕНС НА основе М/СS 232

[and10]

a ja hohu pelemeni

[ssam AleX]

Big THANKS for Sagem unlock solution!!!